Moderno vehicles are built with safety measures to prevent accidents before they happen. One of the most overlooked yet essential measures is the neutral safety switch. This crucial part ensures that your vehicle only starts when its gear is in ‘Park’ or ‘Neutral.’ Without it, your vehicle could unexpectedly lurch forward or backward the moment the engine turns over, which can be quite dangerous.

In some cases, the neutral safety switch (NSS) will show signs of an issue, such as the car starting in a different gear, intermittent no-start conditions, a sudden loss of backup lights, and more. To avoid potential dangers stemming from this problem, learn where the switch is located within the transmission housing and how troubleshooting its functionality can help determine if a visit to the repair shop is necessary.

What Is a Neutral Safety Switch and What Does It Do?

The neutral safety switch is a mechanism designed to stop your vehicle from starting in any other gear besides ‘Park’ or ‘Neutral’ so that your vehicle doesn’t lurch forward or backward. It also often doubles as the backup light switch in some automatic transmissions, meaning it turns your reverse lights on when you switch the gear to ‘Reverse.’ This clever component works in the following way:

• When you turn the ignition key or press the start button, in newer vehicles, the car’s computer and starter circuit check the position of the transmission.
• If the gear selector isn’t in “Park” or “Neutral,” the neutral safety switch halts the electrical connection and prevents the starter motor from engaging.
• Only once the gear is switched to one of the two aforementioned modes will the neutral safety switch allow the electrical connection to flow through.

Common Symptoms of a Failing Neutral Safety Switch

Fortunately, a failing neutral safety switch is relatively simple to diagnose if you know what you are looking for. This component also doesn’t just fail overnight, but rather slowly develops issues over time. Keep an eye out for some of the following red flags:

• The engine won’t crank in ‘Park’ but will in ‘Neutral’: If you consistently need to shift into neutral just to get the car started, your switch may be misaligned or failing.
• The engine cranks in gear: If your car starts in ‘Drive’ or ‘Reverse,’ the safety function has failed completely and should be repaired immediately.
• Intermittent no-start condition: Sometimes the car won’t start at all, as in there is no crank regardless of gear position, because the switch isn’t sending the correct signal to the engine.
• Check engine light or transmission-related error codes: On many newer vehicles, the onboard diagnostics system will log a fault code if the switch sends inconsistent signals.

How to Locate the Neutral Safety Switch in Your Vehicle

The exact location of the neutral safety switch can vary from vehicle to vehicle. On newer vehicles with an automatic transmission, it is typically within the transmission housing where it is mounted to the side or directly connected to the shift linkage. You should look for small and rectangular box-like component.

For those with older vehicles, the switch might be directly integrated within the steering column near the shifter itself. Front-wheel drive vehicles, on the other hand, will often have the NSS attached to the transmission case, which is accessible from under the hood. If you aren’t sure where your neutral safety switch is, simply check your vehicle’s repair manual, which includes diagrams of the car, or look it up online through your car’s manufacturer.

Step-by-Step: How to Test the Switch Before Replacing It

Before you rush to buy a new neutral safety switch when you think you’ve experienced one of the listed issues above, it’s important to first check the condition of your existing one. Many switches fail due to simple misalignment rather than a total breakdown, which is a cheaper fix. To test your switch, try some of the following methods:

1. Check starting positions: Try starting the car in ‘Park’ and then try starting it in ‘Neutral’ – if it only starts in one position, the switch could be loose or misaligned
2. Wiggle test: While holding the key in the start position, gently move the shifter between ‘Park’ and ‘Neutral’ to see if the car cranks intermittently, meaning the switch is likely faulty
3. Multimeter test: Disconnect the wiring harness from the switch, set your multimeter to continuity or resistance mode, and with the shifter in ‘Park,’ and then ‘Neutral,’ test the terminals to see if you have continuity in these positions but not in any other gear

DIY Guide to Replacing a Faulty Neutral Safety Switch

Replacing a neutral safety switch is a relatively simple DIY job once you have located it. Grab some basic tools for cars, including a socket set and ratchet, wrenches, screwdrivers, a multimeter, and a replacement neutral safety switch. Tackle the replacement with the following eight simple steps:

1. Park the car on a flat surface and engage the parking brake. Then, disconnect the negative battery terminal to prevent accidental shorts.
2. Locate the switch by referring to your vehicle manual if you haven’t already. As mentioned, most will be on the transmission case near the gear selector linkage.
3. Disconnect the wiring harness by carefully unplugging the electrical connector from the switch.
4. Unbolt the old switch using the appropriate sockets or wrenches and note its alignment before removal, as proper adjustment is key during reinstallation.
5. Install the new switch and position it in the same orientation as the old one, being sure to hand-tighten bolts, then torque them to spec.
6. Reconnect the wiring and ensure the connector clicks firmly into place.
7. Vuelva a conectar la batería and try starting the car in ‘Park’ and ‘Neutral.’ Verify that it doesn’t crank in gear and check that the reverse lights function properly.
8. If the car only starts in one position, you may need to slightly rotate or realign the switch before fully tightening.

How Warranty Coverage Could Be Affected by Incorrect Diagnosis

It’s worth noting that tackling a DIY repair based on your own diagnosis of the neutral starter switch can potentially invalidate any garantía del auto you have on your vehicle. Manufacturer warranties often dictate that you need to take the car to a dealership to get the auto repair handled, whereas extended warranties or service contracts often dictate that the work must be done by certified shops within their networks.

Take Control of Your Car’s Safety

The neutral safety switch may be one of the most overlooked components under the hood, but it’s also one of the most important. A failing switch can cause everything from a headache due to a no-start issue to a dangerous unintended movement when you start your car. Don’t leave this issue unchecked, and take your vehicle to be diagnosed as soon as possible if you suspect there’s an issue.

If your vehicle warranty has expired, consider investing in a service contract from Endurance Warranty. With a range of customizable auto coverage plans to choose from, you can enjoy coverage ranging from affordable basic plans to protection most similar to the manufacturer warranty that accompanies a new car. On top of this, all Endurance plans come with Asistencia en carretera 24 horas al día, 7 días a la semana and a year of Beneficios de élite, offering bonus perks like reimbursements for up to four tires per year due to road hazards, key fob replacement, windshield repair, and more.*

To learn how Endurance can protect your vehicle, contact one of our service plan advisors at (800) 253-8203 o solicitar una Cotización GRATIS en línea. Tú también puedes ver tu precio and plan recommendations on our eStore.