Whether they came standard or you chose that option, there’s nothing quite as luxurious in your car like leather, real leather, seats. Now, if you want to keep them for a while, it takes some care, like all leather goods. Now, if that sounds like more trouble than it’s worth, fret not, there are easy ways to do it, even if you are no detailing expert.

First thing is first: Get familiar with the two main types of leather found in cars:

• For most Asian and American cars, you can find leather made from the “Spray-on Dying” process. This type of leather is known for vivid and vibrant color, but the trade-off is that it is typically more s more fragile and needs to be taken care of more often. In the sun and hot weather, these are most at risk of losing color prematurely. It is also difficult to recondition when damaged.
• European automakers tend to opt for leather made through the “Vat-Dying” process. This process is much more advanced since what happens is that color is directly embedded inside and out. It is less subject to damage from oil, heat, or sunlight, but it is prone to absorbing strong odors and is sensitive to metal. It is harder to restore color but easier to recondition.

How do you clean leather car seats?

1. Wash and clean your interior first: Now, before you start introducing products and chemicals, you should vacuum your car thoroughly, as well as wiping away dust and debris. Pay special attention to the grooves and crevices of your seats. Remove all the pet hair and dust bunnies, lint, and crumbs, etc.
2. Use the right chemicals to clean the leather. Neutral pH products are best; avoid soap at all costs. And do not even think about using water.
3. Don’t use any tools to apply leather cleaner. A microfiber towel is all you will need to go deeper into the leather and avoid any friction that could damage it. It may seem hard to remove all the dirt from the leather seats, but the key is patience. Also, feel free to use two different cleaners and new rags.

Here’s a tip: many detailers tend to turn up the heat of the car before cleaning leather seats. Heat opens the pores of leather interiors, allowing you to use the cleaning products more thoroughly.

How do you condition car leather?

After cleaning, the next step is to condition your leather interior. Leather conditioning helps to protect and recondition the leather; it penetrates the seats and is responsible for making the car look as if it just got out of the factory. However, leather conditioning is just as involved as cleaning:

1. Dry the leather thoroughly before applying any conditioner. It’s not bad f the leather is still a little but it will make things harder and more time consuming for you.
2. Don’t be afraid of putting too much conditioner. The leather can never really absorb “too much,” but you should still try to wipe away the excess.
3. Let the leather breathe and dry for at least 20-30 minutes after conditioner application.

BONUS: Always use the best leather conditioner you can. Cheap products are more likely to damage your leather than condition it. So don’t skimp here.

Most vehicle owners care about their vehicle’s interior, so cleaning and conditioning are absolutely mandatory. It is recommended that you do this every 3-5 weeks, depending on how often you use your car. You want to preserve that interior for the long run, and cracks on the interior are not good at all.